Engineering and Technology Education 6 to 12
Test Format and Sample Questions
The Engineering and Technology Education 6 to 12 subject area test consists of approximately 80 multiple-choice questions. You will have two and one-half hours to complete the test.
Each question will contain four response options, and you will indicate your answer by selecting A, B, C, or D.
The table below presents types of questions on the exam and directs you to examples of these formats among the sample items that follow.
Table of Question Formats
Type of Question | Sample Question |
---|---|
Direct Question Choose the response option that best answers the question. |
Question 1 |
Sentence Completion Select the response option that best completes the sentence. |
Question 6 |
Graphics Examine a question involving a drawing or a diagram, and select the best response option. |
Question 11 |
Scenario Examine a situation, problem, or case study. Then answer a question, make a diagnosis, or recommend a course of action by selecting the best response option. |
Question 16 |
Sample Questions
The following questions represent both the form and content of questions on the examination. These questions will acquaint you with the general format of the examination; however, these sample questions do not cover all of the competencies and skills that are tested and will only approximate the degree of examination difficulty.
Question 1
Competency 1—Knowledge of the nature and impacts of technology
DIRECTIONS: Read the question and select the best response.
Which of the following is the best example of consumer demands influencing the development of technology?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 2
Competency 1—Knowledge of the nature and impacts of technology
DIRECTIONS: Read the question and select the best response.
A computerized delivery mechanism developed for a biological laboratory for the space program was later adapted for use as an insulin pump that provides individuals with diabetes with regulated amounts of insulin. This example illustrates how
- Enter to expand or collapse answer.Answer expanded
- Correct Response: C.
Question 3
Competency 1—Knowledge of the nature and impacts of technology
DIRECTIONS: Read the question and select the best response.
Which of the following processes is commonly used to produce insulin, human growth hormone, vaccines, and medicines?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: A.
Question 4
Competency 2—Knowledge of principles of drafting
DIRECTIONS: Read the question and select the best response.
Which of the following would be the most appropriate drafting instrument for quickly drawing accurate right angles at any point on a page?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 5
Competency 2—Knowledge of principles of drafting
DIRECTIONS: Read the question and select the best response.
An isometric drawing would be most appropriate to use to depict which of the following objects?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: A.
Question 6
Competency 2—Knowledge of principles of drafting
DIRECTIONS: Read the question and select the best response.
Using a 3D scanner permits the acquisition of information that can be output to a(an)
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 7
Competency 3—Knowledge of principles of engineering
DIRECTIONS: Read the question and select the best response.
A prototype is manufactured after which stage in the development of a product?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 8
Competency 3—Knowledge of principles of engineering
DIRECTIONS: Read the question and select the best response.
Applications of the study of ergonomics have had the most significant positive effects in which of the following aspects of the workplace?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: C.
Question 9
Competency 3—Knowledge of principles of engineering
DIRECTIONS: Read the question and select the best response.
In automotive design, wind tunnel testing is primarily used to calculate which of the following data?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 10
Competency 4—Knowledge of energy and power technologies
DIRECTIONS: Read the question and select the best response.
Which of the following is a significant environmental problem with the use of wind turbines to generate electricity?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: A.
Question 11
Competency 4—Knowledge of energy and power technologies
DIRECTIONS: Read the question and select the best response.
Use the diagram below to answer the question that follows.
A series D C circuit consists of a 24-volt battery, a resistor labeled R, and an amp meter labeled 6 A.
A resistor of unknown value is connected to a 24-volt source in a circuit with a current of 6 amps, as shown. What is the resistance in the circuit?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 12
Competency 4—Knowledge of energy and power technologies
DIRECTIONS: Read the question and select the best response.
Compared with digital circuits, analog circuits are generally characterized by
- Enter to expand or collapse answer.Answer expanded
- Correct Response: D.
Question 13
Competency 5—Knowledge of information and communication technologies
DIRECTIONS: Read the question and select the best response.
Which of the following processes involves demodulating a signal?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: D.
Question 14
Competency 5—Knowledge of information and communication technologies
DIRECTIONS: Read the question and select the best response.
Communication between laptop computers with wireless Internet capability and a nearby router make use of
- Enter to expand or collapse answer.Answer expanded
- Correct Response: D.
Question 15
Competency 5—Knowledge of information and communication technologies
DIRECTIONS: Read the question and select the best response.
Which of the following printing processes involves transferring images and text onto a printing plate, which then carries ink to a blanket cylinder that makes contact with the paper?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 16
Competency 6—Knowledge of transportation technologies
DIRECTIONS: Read the question and select the best response.
If an antilock braking system in an automobile fails, which two subsystems should be evaluated?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: A.
Question 17
Competency 6—Knowledge of transportation technologies
DIRECTIONS: Read the question and select the best response.
Most international shipping is done via containerships primarily because these ships
- Enter to expand or collapse answer.Answer expanded
- Correct Response: D.
Question 18
Competency 6—Knowledge of transportation technologies
DIRECTIONS: Read the question and select the best response.
A rotary winged aircraft would be most appropriate for performing which of the following tasks?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 19
Competency 7—Knowledge of manufacturing technologies
DIRECTIONS: Read the question and select the best response.
Which of the following types of machinery would be most appropriate for knurling the handle of a torque wrench?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: A.
Question 20
Competency 7—Knowledge of manufacturing technologies
DIRECTIONS: Read the question and select the best response.
A job-lot manufacturing process would be most appropriate for accomplishing which of the following tasks?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: C.
Question 21
Competency 7—Knowledge of manufacturing technologies
DIRECTIONS: Read the question and select the best response.
Which of the following would most likely be considered legal negligence on the part of a manufacturer?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 22
Competency 8—Knowledge of construction technologies
DIRECTIONS: Read the question and select the best response.
A public civil construction project differs from other types of construction in terms of
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 23
Competency 8—Knowledge of construction technologies
DIRECTIONS: Read the question and select the best response.
Which of the following construction tools has most significantly reduced the amount of time it takes to frame a wooden structure?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: D.
Question 24
Competency 8—Knowledge of construction technologies
DIRECTIONS: Read the question and select the best response.
Which of the following loads on a building is considered a lateral load?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: C.
Question 25
Competency 9—Knowledge of laboratory management and safety
DIRECTIONS: Read the question and select the best response.
Which of the following resources would provide an instructor with the proper information for placing safety zones around machinery in a school's manufacturing laboratory?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 26
Competency 9—Knowledge of laboratory management and safety
DIRECTIONS: Read the question and select the best response.
Along with safety glasses, which of the following is most important for students to wear when working with rotary power tools such as a lathe or drill press?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 27
Competency 9—Knowledge of laboratory management and safety
DIRECTIONS: Read the question and select the best response.
A class A fire extinguisher would be most appropriate for putting out a fire on which of the following types of materials?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: C.
Question 28
Competency 10—Knowledge of technology education, professional development, and standards-based instruction and assessment
DIRECTIONS: Read the question and select the best response.
Geometric concepts involving triangles and the Pythagorean theorem could be incorporated most effectively into lessons that involve calculating the
- Enter to expand or collapse answer.Answer expanded
- Correct Response: B.
Question 29
Competency 10—Knowledge of technology education, professional development, and standards-based instruction and assessment
DIRECTIONS: Read the question and select the best response.
To maintain reliability when observing and assessing multiple students' performance on a particular task, it is most important for the teacher to use a
- Enter to expand or collapse answer.Answer expanded
- Correct Response: A.
Question 30
Competency 10—Knowledge of technology education, professional development, and standards-based instruction and assessment
DIRECTIONS: Read the question and select the best response.
Which of the following professional development activities would best help promote professionalism within a technology education teacher's field?
- Enter to expand or collapse answer.Answer expanded
- Correct Response: D.